Publications

YEAR 2023 (upto end of March 2023)

Ali, Yasir, et al. “Mechanical Stability of the Heterogenous Bilayer Solid Electrolyte Interphase in the Electrodes of Lithium–Ion Batteries.” Mathematics 11.3 (2023): 543.

Khan, Abdullah, et al. “Numerical and Experimental Analysis of Shell and Tube Heat Exchanger with Round and Hexagonal Tubes.” Energies 16.2 (2023): 880.

Afridi, Saadia, et al. “Numerical Investigation on the Thrust Vectoring Performance of Bypass Dual Throat Nozzle.” Energies 16.2 (2023): 594.

Zhao, Fuwang, et al. “Interaction of two fully passive flapping foils arranged in tandem and its influence on flow energy harvesting.” Energy (2023): 126714.

Mehmood, Kashif, et al. “Numerical analysis of bladeless ceiling fan: An effective alternative to conventional ceiling fan.” Journal of Wind Engineering and Industrial Aerodynamics 221 (2022): 104905.

YEAR 2022

Hameed, Asad, et al. “Failure analysis of a cracked cylinder block assembly of an aircraft brake system.” Engineering Failure Analysis 133 (2022): 105948.

Gao, Zhe, et al. “Sensor fusion and on-line monitoring of friction stir blind riveting for lightweight materials manufacturing.” Journal of Manufacturing Science and Engineering 144.6 (2022): 061009.

Asim, Muhammad Farhat, et al. “On Improvement of Flight Dynamic Model of a Supersonic Aircraft using Wind Tunnel to Flight Corrections.” AIAA SCITECH 2022 Forum. 2022.

Maqsood, Adnan M., et al. “Design Refinement and Performance Evaluation of a Fan Stage of a Low Bypass Turbofan Engine.” AIAA SCITECH 2022 Forum. 2022.

Maqsood, Adnan M., Ibrahim Sher, and Jehanzeb Masud. “Flow Field and Performance Evaluation of an Integrated Fan Stage of a Low Bypass Turbofan Engine.” AIAA SCITECH 2022 Forum. 2022.

Sher, Ibrahim, et al. “Dynamic Analysis of High Alpha Coning Motion Aerodynamic Characteristics of a Supersonic Aircraft.” AIAA SCITECH 2022 Forum. 2022.

Rehan, Muhammad, et al. “Computational Study for Estimating Longitudinal Dynamic Derivative of a Wide Body Aircraft.” AIAA SCITECH 2022 Forum. 2022.

Ahmad, Fareed, et al. “Optimization of Carbon Fiber Reinforced Plastic Curing Parameters for Aerospace Application.” Applied Sciences 12.9 (2022): 4307.

Noura, Zouaghi, et al. “Wearable healthcare monitoring based on a microfluidic electrochemical integrated device for sensing glucose in natural sweat.” Sensors 22.22 (2022): 8971.

Aziz, Shahid, et al. “Computational fluid dynamics and experimental analysis of a wind turbine blade’s frontal section with and without arrays of dimpled structures.” Energies 15.19 (2022): 7108.

Khan, Rehan, et al. “Influence of elbow angle on erosion-corrosion of 1018 steel for gas–liquid–solid three phase flow.” Materials 15.10 (2022): 3721.

Afridi, Saadia, and Tariq Amin Khan. “Multi-objective nozzle design optimization for maximum thrust vectoring performance.” Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 237.3 (2023): 587-599.

Ahmad, Muhammad, et al. “Determination of efficient configurations of vertical axis wind turbine using design of experiments.” Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy 236.8 (2022): 1558-1581.

Ahmad, Muhammad, Aamer Shahzad, and M. Nafees Mumtaz Qadri. “An overview of aerodynamic performance analysis of vertical axis wind turbines.” Energy & Environment (2022): 0958305X221121281.

Yousaf, Rizwan, et al. “Design, Analysis and Prototyping of One-DoF Drive Mechanism for Flapping Wing Micro-aerial Vehicle Application.” Iranian Journal of Science and Technology, Transactions of Mechanical Engineering (2022): 1-18.

Ahmad, Muhammad, et al. “Design optimization of Double-Darrieus hybrid vertical axis wind turbine.” Ocean Engineering 254 (2022): 111171.

Shams, Taimur Ali, et al. “A novel solution methodology for longitudinal flight characterization of a Flying-Wing Micro Aerial Vehicle.” Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 236.15 (2022): 3201-3219.

Rehan, M., et al. “Vertical take-off and landing hybrid unmanned aerial vehicles: An overview.” The Aeronautical Journal (2022): 1-41.

Shams, Taimur A., et al. “Numerical estimation of longitudinal damping derivatives of a flying wing micro aerial vehicle.” Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 236.15 (2022): 3261-3280.

Khan, Sabih Ahmad, et al. “Classification of progressive failure and mechanical behavior of dissimilar material hybrid joints at varying temperatures.” Thin-Walled Structures 182 (2023): 110212.

Khan, Haris Ali, et al. “Development and characterization of a new riveting process for pre-drilled holes hard-to-access aircraft riveted joints.” The International Journal of Advanced Manufacturing Technology 120.9-10 (2022): 6635-6646.

Khan, Abdullah, et al. “Numerical and Experimental Analysis of Drag and Lift Forces on a Bullet Head.” Aerospace 9.12 (2022): 816.

YEAR 2021

Haider, Naeem, et al. “Aerodynamic analysis of hummingbird-like hovering flight.” Bioinspiration & Biomimetics 16.6 (2021): 066018.

Yousaf, R., et al. “Recent advancements in flapping mechanism and wing design of micro aerial vehicles.” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 235.19 (2021): 4425-4446.

Bilal, Muhammad, et al. “Design and Computational Study of Main Body of Bird Like Flapping Wing MAV.” 2021 International Conference on Applied and Engineering Mathematics (ICAEM). IEEE, 2021.

Zhao, Fuwang, et al. “Flow-energy harvesting using a fully passive flapping foil: A guideline on design and operation.” International Journal of Mechanical Sciences 197 (2021): 106323.

Ahmad, Shakeel, et al. “Droplet impact on nano-textured bumps: Topology effects.” Computers & Fluids 218 (2021): 104844.

Khan, Haris Ali, et al. “Roll bonding processes: State-of-the-art and future perspectives.” Metals 11.9 (2021): 1344.

Chen, Nannan, et al. “Increased Ʃ3 boundaries: Effects of friction stir and post heating on pure copper.” Materials Characterization 176 (2021): 111120.

Akram, F., et al. “Design space optimisation of an unmanned aerial vehicle submerged inlet through the formulation of a data-fusion-based hybrid model.” The Aeronautical Journal 125.1292 (2021): 1815-1832.

Khan, Haris Ali, et al. “Roll bonding processes: State-of-the-art and future perspectives.” Metals 11.9 (2021): 1344.

Mehmood, Zahid, et al. “Multiaxial stress mapping and fatigue failure prediction of aircraft hydraulic pipes.” Engineering Failure Analysis 121 (2021): 105168.

Rehan, Muhammad, and Mohtashim Mansoor. “Application of MEMS in safety and arming devices: An overview.” Microsystem Technologies 27 (2021): 3599-3610.

Mazhar, Farrukh, et al. “On the meshfree particle methods for fluid-structure interaction problems.” Engineering Analysis with Boundary Elements 124 (2021): 14-40.

Iqbal, Farrukh, Ali Javed, and Aamer Shahzad. “Sloshing Analysis of a Supersonic Fuel Tank of an Aircraft.” 2021 International Conference on Applied and Engineering Mathematics (ICAEM). IEEE, 2021.

Sohail, Syed Qasim, et al. “Design and Transition of a Quad Rotor Tail-sitter VTOL UAV with Experimental Verification.” 2021 International Bhurban Conference on Applied Sciences and Technologies (IBCAST). IEEE, 2021.

Siddiqui, Muhammad Aneeb, et al. “Design and Analysis of Flapping Wing Apparatus.” 2021 International Bhurban Conference on Applied Sciences and Technologies (IBCAST). IEEE, 2021.

Tariq, Muhammad Muaaz, Rizwan Yousaf, and Aamer Shahzad. “Design, analysis and fabrication of RC operated flapping wing micro aerial vehicle mimicking natural flyers.” 2021 International Bhurban Conference on Applied Sciences and Technologies (IBCAST). IEEE, 2021.

Anwar, Muhammad Bilal, Aamer Shahzad, and Muhammad Nafees Mumtaz Qadri. “Investigating the effects of leading-edge tubercles on the aerodynamic performance of insect-like flapping wing.” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 235.2 (2021): 330-341.

Haider, Naeem, et al. “Recent progress in flapping wings for micro aerial vehicle applications.” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 235.2 (2021): 245-264.

Shams, Taimur Ali, et al. “Identification of Geometrical Parameters Dependency on Aerodynamic and Stability Characteristics of Flying Wing Micro Air Vehicle.” 2021 International Bhurban Conference on Applied Sciences and Technologies (IBCAST). IEEE, 2021.

Shams, Taimur Ali, et al. “Kinematics of Nose Landing Gear for RLGS Mechanism of MALE UAV.” 2021 International Bhurban Conference on Applied Sciences and Technologies (IBCAST). IEEE, 2021.

Ahmad, Muhammad, et al. “Estimation of Stability Parameters for Wide Body Aircraft Using Computational Techniques.” Applied Sciences 11.5 (2021): 2087.

Ahmad, Muhammad Ayaz, et al. “Comprehensive design of an oleo-pneumatic nose landing gear strut.” Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 235.12 (2021): 1605-1622.

Ahmad, Muhammad Ayaz, et al. “Design and Structural Analysis of Composite Strut for a Lightweight Aircraft.” 2021 International Conference on Applied and Engineering Mathematics (ICAEM). IEEE, 2021.

Khushbash, Sara, Ali Javed, and Taimur Ali Shams. “Computational analysis of low mass moment of inertia flying wing.” 2021 International Bhurban Conference on Applied Sciences and Technologies (IBCAST). IEEE, 2021.

Mohiuddin, Khawar, et al. “Effect of engine compression ratio, injection timing, and exhaust gas recirculation on gaseous and particle number emissions in a light-duty diesel engine.” Fuel 294 (2021): 120547.

Choi, Minhoo, et al. “Investigation of the effects of EGR rate, injection strategy and nozzle specification on engine performances and emissions of a single cylinder heavy duty diesel engine using the two color method.” Applied Thermal Engineering 193 (2021): 117036.

Mohiuddin, Khawar, and Sungwook Park. “Characteristics and fundamentals of particulates in diesel engine.” Engine Exhaust Particulates (2019): 55-69.

Mohiuddin, Khawar, et al. “Experimental investigation on the effect of injector hole number on engine performance and particle number emissions in a light-duty diesel engine.” International Journal of Engine Research 22.8 (2021): 2689-2708.

Choi, Minhoo, Khawar Mohiuddin, and Sungwook Park. “Effects of methane ratio on MPDF (micro-pilot dual-fuel) combustion characteristic in a heavy-duty single cylinder engine.” Scientific reports 11.1 (2021): 9740.

Mir, Imran, et al. “Contraction analysis of dynamic soaring.” AIAA SCITECH 2022 Forum. 2022.

Khan, Raja Muhammad Awais, et al. “A novel hybrid damage monitoring approach to understand the correlation between size effect and failure behavior of twill CFRP laminates.” Composite Structures 270 (2021): 114064.

Sultan, Umair, et al. “Qualitative assessment and global mapping of supercritical CO2 power cycle technology.” Sustainable Energy Technologies and Assessments 43 (2021): 100978.

Latif, R. F., et al. “A semi-analytical approach for flutter analysis of a high-aspect-ratio wing.” The Aeronautical Journal 125.1284 (2021): 410-429.

Khan, Muhammad Khizer Ali, et al. “An overview of methods for investigation of aeroelastic response on high aspect ratio fixed-winged aircraft.” IOP Conference Series: Materials Science and Engineering. Vol. 899. No. 1. IOP Publishing, 2020.

Hussain, Syed Baleegh, Syed Irtiza Ali Shah, and Muhammad Khizer Ali Khan. “Aerodynamic design considerations for a soccer ball.” 2019 Sixth International Conference on Aerospace Science and Engineering (ICASE). IEEE, 2019.

YEAR 2020

Qadri, MN Mumtaz, Fuwang Zhao, and Hui Tang. “Fluid-structure interaction of a fully passive flapping foil for flow energy extraction.” International Journal of Mechanical Sciences 177 (2020): 105587.

Mehmood, Zahid, et al. “Analysis of premature failure of aircraft hydraulic pipes.” Engineering Failure Analysis 109 (2020): 104356.

Jamil, Muhammad, et al. “Performance analysis of flapping foil flow energy harvester mounted on piezoelectric transducer using meshfree particle method.” Journal of Applied Fluid Mechanics 13.6 (2020): 1859-1872.

Hameed, Asad, et al. “Failure analysis of a broken support strut of an aircraft landing gear.” Engineering Failure Analysis 117 (2020): 104847.

Shams, Taimur Ali, et al. “Experimental investigation of propeller induced flow on flying wing micro aerial vehicle for improved 6DOF modeling.” IEEE Access 8 (2020): 179626-179647.

Hussain, Syed Baleegh, Syed Irtiza Ali Shah, and Aamer Shahzad. “Optimization and aerodynamic design of a soccer ball using numerical analysis.” 2020 International Conference on Engineering and Emerging Technologies (ICEET). IEEE, 2020.

Khan, Anas Manzoor, Aamer Shahzad, and Taimur Ali Shams. “An Overview of Stability and Performance Analysis of Hybrid Vertical Take-off and Landing Unmanned Aerial Vehicle.”

Shams, Taimur Ali, et al. “Airfoil selection procedure, wind tunnel experimentation and implementation of 6dof modeling on a flying wing micro aerial vehicle.” Micromachines 11.6 (2020): 553.

Shams, Taimur Ali, Syed Irtiza Ali Shah, and Muhammad Ayaz Ahmad. “Capability analysis of global hypersonic wind tunnel facilities for aerothermodynamic investigations.” 2020 17th International Bhurban Conference on Applied Sciences and Technology (IBCAST). IEEE, 2020.

Shams, Taimur Ali, et al. “Selection methodology of an electric actuator for nose landing gear of a light weight aircraft.” Applied Sciences 10.23 (2020): 8730.

Toor, Zakria, et al. “Comparative Analysis of Aerodynamic Characteristics of a Transport Aircraft and its AWACS Variant.” AIAA Scitech 2020 Forum. 2020.

Khan, Omer, and Anwar Ahmed. “Modification of jet exiting a cyclone chamber.” AIAA Scitech 2020 Forum. 2020.

Mohiuddin, Khawar, et al. “Effect of hydraulic flow rate, injection timing, and exhaust gas recirculation on particulate and gaseous emissions in a light-duty diesel engine.” Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 234.5 (2020): 1279-1293.

Khan, Raja Muhammad Awais, et al. “Investigation on interlaminar delamination tendency of multidirectional carbon fiber composites.” Polymer Testing 90 (2020): 106653.

Tang, Weiyu, et al. “Effects of Materials on the Heat Transfer Coefficient During Condensation and Evaporation of R410A.” Journal of Solar Energy Engineering 143.3 (2021).

Khan, Tariq Amin, et al. “Experimental Study on the Thermal-Hydraulic Performance of Louvered Fin and Flat Tube Heat Exchangers.” Heat Transfer Summer Conference. Vol. 83709. American Society of Mechanical Engineers, 2020.

Khan, Tariq Amin, et al. “Significance of Delta Winglets on the Air Side Performance of Flat Finned Versus Wavy Finned-Tube Heat Exchangers.” Heat Transfer Summer Conference. Vol. 83709. American Society of Mechanical Engineers, 2020.

Zaman, Muhammad Hamza, et al. “Selection of a low-cost high efficiency centrifugal pump.” 2017 Fifth International Conference on Aerospace Science & Engineering (ICASE). IEEE, 2017.

YEAR 2019

Shahzad, A., Mumtaz Qadri, and S. Ahmad. “Numerical analysis of high aspect ratio flexible wings in flapping motion.” Journal of Applied Fluid Mechanics 12.6 (2019): 1979-1988.

Qadri, Mumtaz, et al. “An experimental investigation of a passively flapping foil in energy harvesting mode.” Journal of Applied Fluid Mechanics 12.5 (2019): 1547-1561.

Javed, Ali, et al. “Upwind skewed radial basis functions (USRBF) for solution of highly convective problems over meshfree nodes.” Engineering with Computers 37 (2021): 1081-1097.

Javed, Yaser, Mohtashim Mansoor, and Irtiza Ali Shah. “A review of principles of MEMS pressure sensing with its aerospace applications.” Sensor Review (2019).

Javed, Yaser, and Mohtashim Mansoor. “Wall Shear Stress Measurement Using an SOI CMOS Multisensor MEMS Chip.” 2019 International Conference on Engineering and Emerging Technologies (ICEET). IEEE, 2019.

Abbas, Syed Asad, Ahmad Hassan, and Mohtashim Mansoor. “Design of Thrust Measurement System on Test Beds of a Gas Turbine Engine Using Strain Gauges.” 2019 16th International Bhurban Conference on Applied Sciences and Technology (IBCAST). IEEE, 2019.

Bhatti, Nabeel, Syed Irtiza Ali Shah, and Aamer Shahzad. “Numerical Analysis of Multiphase Blood Flow within Carotid Artery & bifurcation using Mixture Model Theory.” 2019 15th International Conference on Emerging Technologies (ICET). IEEE, 2019.

Shahzad, A., Mumtaz Qadri, and S. Ahmad. “Numerical analysis of high aspect ratio flexible wings in flapping motion.” Journal of Applied Fluid Mechanics 12.6 (2019): 1979-1988.

Yousaf, Rizwan, Ali Javed, and Aamer Shahzad. “Static structural and modal analysis of micro air vehicle flapping wing with varying stiffness structures.” 2019 16th International Bhurban Conference on Applied Sciences and Technology (IBCAST). IEEE, 2019.

Javed, Ali, et al. “A stabilized RBF finite difference method for convection dominated flows over meshfree nodes.” Engineering Analysis with Boundary Elements 107 (2019): 159-167.

Ahmad, Muhammad Ayaz, Syed Irtiza Ali Shah, and Taimur Ali Shams. “Computational Analysis of Environmental Control System of an Aircraft Using Dry and Moist Air as Medium.” 2019 16th International Bhurban Conference on Applied Sciences and Technology (IBCAST). IEEE, 2019.

Shams, Taimur Ali, et al. “Evaluation of Aerodynamic and Stability Performance Parameters of High Wing Piston Engine Aircraft.” 2019 16th International Bhurban Conference on Applied Sciences and Technology (IBCAST). IEEE, 2019.

Toor, Z., et al. “Numerical Investigation of Aerodynamic Loads on a Flexible Wing.” 2019 IEEE 10th International Conference on Mechanical and Aerospace Engineering (ICMAE). IEEE, 2019.

Toor, Zakria G., et al. “Comparative Analysis of Store Release Trajectory using Numerical and Experimental Techniques.” AIAA Scitech 2019 Forum. 2019.

Javaid, Syed Saad, Wade R. Lanning, and Christopher L. Muhlstein. “The development of zones of active plasticity during mode I steady-state crack growth in thin aluminum sheets.” Engineering Fracture Mechanics 218 (2019): 106540.

Lanning, Wade R., et al. “Mode I steady-state crack propagation through a fully-yielded ligament in thin ductile metal foils.” Theoretical and Applied Fracture Mechanics 101 (2019): 141-151.

Muhlstein, Christopher L., et al. “Steady-State Tearing of 25, 50, and 125 Micrometer Thick Aluminum Sheets.” (2019).

Bhatti, Nabeel, and Syed Irtiza Ali Shah. “Steady & Transient State Analysis of Non-Newtonian Flow of Blood in Coronary Arteries.” 2019 International Conference on Applied and Engineering Mathematics (ICAEM). IEEE, 2019.

Jamil, Muhammad, and Ali Javed. “Design optimization of a semi-active flapping foil in an energy extraction mode.” 2019 International Conference on Engineering and Emerging Technologies (ICEET). IEEE, 2019.

Ali, Hafiz Qasim, et al. “Microscopic analysis of failure in woven carbon fabric laminates coupled with digital image correlation and acoustic emission.” Composite Structures 230 (2019): 111515.

Tabrizi, Isa Emami, et al. “Determining tab material for tensile test of CFRP laminates with combined usage of digital image correlation and acoustic emission techniques.” Composites Part A: Applied Science and Manufacturing 127 (2019): 105623.

Ali, Hafiz Qasim, et al. “Experimental study on dynamic behavior of woven carbon fabric laminates using in-house piezoelectric sensors.” Smart Materials and Structures 28.10 (2019): 105004.

Zhu, Hua, et al. “Thermal-hydraulic performance and optimization of tube ellipticity in a plate fin-and-tube heat exchanger.” Journal of Electronic Packaging 141.3 (2019).

Ke, Hanbing, et al. “Thermal-hydraulic performance and optimization of attack angle of delta winglets in plain and wavy finned-tube heat exchangers.” Applied Thermal Engineering 150 (2019): 1054-1065.

Publications

Departments